30491900 TSUKASA TG-47C-FU-16-CKA 24VDC DC Geared Motor for Universal Insertion Machine

TSUKASA TG-47C-FU-16-CKA DC Geared Motor (Dedicated for Universal Insertion Machines)

This is a 24V DC planetary geared motor manufactured by TSUKASA of Japan. It is a classic original part for Universal automatic insertion machines, used for precision driving of the feeding and insertion mechanisms.

I. Core Parameter Overview

Parameter Item | Specification Details

Model: TG-47C-FU-16-CKA

Brand: TSUKASA (Japan)

Type: DC 24V Planetary Gear Motor

Rated Voltage: 24 VDC

Reduction Ratio: 16:1

Gearbox Type: FU Series Planetary Gear (φ22mm)

Motor Size: φ27.7mm (47 Series Motor)

Operating Temperature: -10 ~ +60℃

Typical Applications: Universal automatic insertion machine, industrial precision drive equipment

II. Model Explanation

Meaning of Parts in TG-47C-FU-16-CKA:

TG-47: Represents the 47 series DC motor, a classic micro-motor platform from TSUKASA.

C: Motor winding specification code, suitable for the control circuit of insertion machines.

FU: Planetary gearbox series, characterized by small size, high torque, and smooth operation.

16: Reduction Ratio 16:1, providing suitable speed and torque for the insertion machine.

CKA: Shaft type and cable exit code, perfectly matched to the insertion machine’s mounting position.

III. Insertion Machine Application Scenarios

1. Core Uses
Drives the insertion machine’s feeder, insertion head positioning mechanism, cutting/forming mechanism, etc., providing low-speed, high-torque precision power.
Adapts to the high-frequency start/stop and forward/reverse operation of Universal vertical/horizontal insertion machines, ensuring insertion accuracy and stability.

2. Compatibility Advantages
Planetary reduction structure: High output torque, low noise, smooth operation, suitable for precision positioning.
24V DC drive: Directly compatible with the insertion machine’s control power supply, no additional conversion required.
Long life design: Industrial-grade brush and gear materials, capable of withstanding long-term high-load operation.
Original installation dimensions: Shaft diameter, mounting flange, and wiring terminals perfectly match the equipment, allowing for direct replacement.

IV. Usage and Maintenance Points
Power Supply Requirements: Requires a stable 24VDC power supply; voltage fluctuations must be controlled within ±10%. Within the specified limits, avoid overvoltage that could burn out the motor windings.

Load and Installation: Avoid overload operation. Ensure coaxiality during installation to prevent uneven bearing stress and wear.

Common Troubleshooting

Fault Phenomenon 1: Motor does not rotate / abnormal speed

Troubleshooting: Check the power supply voltage and terminal contact; use a multimeter to measure the motor winding resistance to determine if there is an open circuit / short circuit.

Fault Phenomenon 2: Excessive operating noise / jerking

Troubleshooting: Often due to gearbox wear or internal lubrication failure; the motor needs to be replaced (the gearbox cannot be repaired separately).

Fault Phenomenon 3: Insufficient output torque

Troubleshooting: Worn brushes, damaged reduction gears, or aging windings; it is recommended to directly replace the motor with the same model.