LCX-DC-505 Integrated Intelligent DC Ion Wind Wand
Machine with HDC-AC high-voltage power supply built-in type
Adopting HDC-AC technology, it can achieve long-term stability of static electricity removal performance and
long-term cleaning-free
The static electricity removal time and size are 30% higher than traditional products!
Can remotely control the switch status, have I/O port, provide PLC to collect alarm signals
Main Features
- 30% performance improvement
- Long-term stable static electricity removal performance
- Reduced wear of discharge needle
- Ultra-low ozone
- Excellent ion balance characteristics
- Large flow nozzle
- Cleaning timer
- Types of discharge needles
- Safety features
* The static electricity removal time and size are increased by 30% (compared with our company’s
traditional products) It has a more than 30%
increase in static electricity removal time and is more compact. It is an ionizer with the industry’s top static
electricity removal performance.
* The small flow type discharge needle nozzle that suppresses air consumption is easy to replace
There are also two types of discharge needle nozzles, a normal air consumption nozzle and a small flow type
Large flow nozzle (4 holes) Discharge negative
electrode
Discharge needle
nozzle that can suppress compressed air consumption. The nozzle can be easily replaced.
* Cleaning timer function notifies cleaning time
When the timer reaches the preset value, the LED lights up to notify that the discharge needle cleaning time has
arrived. The time until the light turns on can be set by the user.
(100 to 10,000 hours, 9 modes, and can also be set to not turn on.)
* Ensure safety
Micro-discharge detection and low-voltage wiring with DC24V input ensure safe use
New major improved features and functions (I)
I.R.G. structure (Round ground built-in)
The I.R.G. structure is adopted for the first time, in which the GND plate, which is indispensable
for ions, is built into the main unit of the static eliminator. The generated ions do not flow toward
the GND plate, but flow toward the target without loss, thereby increasing the amount of ions in
the target.
New major improved features and functions (II)
Reduced maintenance workload
5 times higher than traditional models
In addition to the main electrode needle, the accelerating electrode needle also adopts a
sheath-type air guide structure that protects the electrode needle from dust adhesion. When clean
and dry air is supplied, the sheath-type air guide structure can keep the electrode needle clean
regardless of the surrounding environmental conditions. This structure can greatly reduce the
maintenance workload, resulting in a significant reduction in maintenance steps.
Compared with traditional models
High voltage power supply built-in type equipped with HDC-AC
Product Parameters
Note: The machine must be reliably grounded.
Meaning of each indicator light
POWER: Green LED lights up when power is normally connected
RUN: Green LED lights up when operating normally
ALARM: Red LED lights up when micro-discharge occurs in the high voltage part of the main body such as the
discharge needle or when overcurrent occurs in the main circuit
CLEANING: Yellow LED lights up when the cumulative operation time set by T-SELECT is exceeded and remains on
until the RESET button is used to release it
TIMER RESET: This button is used to release the CLEANING LED from lighting
T-SELECT: This selector is used to set the cumulative continuous time for the CLEANING LED to light up
(6). When installed without air source, the distance between the rod ion nozzle and the workpiece
is 15~20mm (depending on the on-site situation)
The recommended operating speed of the UV printer is 8pass (depending on the on-site printing
situation)
(7). When installed with air source, the distance between the rod ion nozzle and the workpiece is
50~100mm (depending on the on-site situation)
The recommended operating speed of the UV printer is 8psaa (depending on the on-site printing
situation)
(8). Suitable for printing acrylic, PC, ABS and other materials.
Ion wind rods are widely used in many electronic industries. They are used in
large-scale and ultra-large-scale integrated circuit clean workshops to prevent
static electricity generated by human movement in the workshop. At the same time,
ion wind rods are sometimes necessary to be worn out during use. So we need to regularly
maintain and service the ion wind rods. So how can we maintain and service the ion
wind rods well?
In industrial production, due to the friction, peeling, extrusion, induction, etc.
between objects, the surface area of objects has charges of different properties.
When this charge accumulates to a certain extent, industrial products will produce
static adsorption and discharge. The accumulation and discharge of static charge will
have a great impact and damage on industrial production. The function of the ion wind
rod is to use air ionization to generate a large number of positive and negative
charges, and blow out the positive and negative charges with dry and clean compressed
air. Form a positive and negative charge airflow to neutralize the charge on the
surface of the object. When the surface of the object is negatively charged, it will
attract the positive charge in the airflow, and when the surface of the object is
positively charged, it will attract the negative charge in the current, so that the
static electricity on the surface of the object is neutralized, achieving the purpose
of eliminating static electricity. If there is dust on the surface of the discharge
needle of the ion wind rod, it will hinder the discharge needle of the ion wind rod
from ionizing the air into positive and negative charges. The load will increase after
long-term operation, thereby generating a certain amount of heat, which will reduce
the performance of the plastic parts and cause embrittlement.
How to maintain:
- When using the ion wind stick, if dust or debris accumulates on the needle tip,
it must be cleaned in time. - Use an electrostatic brush or dust-free cloth dipped in anhydrous industrial
alcohol to gently remove dust from the outer shell of the ion wind stick. Clean it
every three days.
Note:
- The working input power of the power box must be connected to a reliable ground terminal at
the same time. - The grounding wire of the ion wind rod must be reliably connected to the ground terminal of
the power box to ensure the safety of the user. - This device should not be used in rainy or humid environments.
- It is strictly forbidden to use this device in flammable and explosive environments.
- It is strictly forbidden to disassemble the product without authorization. Internal
maintenance and repair must be performed by professionals. - When checking or replacing the product, the power must be turned off, otherwise it may cause
electric shock or fire. - Designed for static electricity removal, it is strictly forbidden to use it for other purposes.
Any abnormal use may cause hidden dangers such as machine failure, electric shock, fire, etc. - When powered on, it is strictly forbidden to touch the electrode needle, otherwise it is easy
to cause failure and electric shock accidents. - The electric needle is a sharp metal object, please use it with caution.
Before the product is powered on, please check the power supply specifications. Any power supply
that does not meet the specifications will cause damage to the product or even failure.